Navy curtains may be safer than curtain rods
It was a case of an accident waiting to happen.
The Navy was working on new curtains and when a contractor mistakenly cut one of them, the problem spread to the rest.
The curtain rods were also cut.
A few days later, the Navy was forced to recall all of its curtain rods.
That prompted the U.S. Consumer Product Safety Commission to investigate the issue.
The investigation found that a few of the Navy’s curtains were unsafe, causing serious damage to their material.
The rods also had holes that were causing them to come apart, creating a problem for workers.
The problem wasn’t unique to the Navy, however.
The U.K. Department of Energy and Japan’s nuclear watchdog agency were also looking into the issue, and both were able to identify problems with some of the curtains that were manufactured.
While the problems were isolated, the U,S.
and Japan all found that curtains made in Japan were more likely to break.
The Japanese investigation revealed that many of the rods were sold in a warehouse and were delivered to an address where they were installed without testing.
As a result, they were vulnerable to cracking, corrosion and moisture intrusion.
The results were shocking, according to David S. Bailie, director of the Consumer Product Quality Protection Office at the U-M Center for Energy Security and Security.
“The rods were basically not properly packaged,” he said.
“In fact, it’s hard to imagine that they were even assembled.”
Bailies investigation led him to a U.W.-led study, which found that the rods had broken in a few locations, and some of them had caused damage that was causing the curtain rods to break apart.
The rod was shipped to a third party where it was welded and sold, with no testing performed.
“When you weld an old rod and then sell it, you’re taking the rod apart, so you know you’re not breaking it,” Bailys study found.
“That’s what happens when you weld rods.”
The rods were then sent to the U’s U.N. base in Okinawa, where they eventually fell apart, Bailis study found, resulting in several injuries to people inside.
“They were not tested to make sure they weren’t breaking,” he explained.
In addition, there was no way to know whether the rods would break before they were sold, which meant they were destined for recycling.
“It’s really a mess,” said Baili, who has been researching the issue for nearly 20 years.
“If it hadn’t been welded together and welded into the rods, they wouldn’t have been welding.”
The problems were also the fault of the manufacturer, and not the rods themselves.
“I think it’s safe to say the rods are going to fail,” said S.J. Baughman, vice president of product development at Moleskin, the company that makes the Navy curtains.
Moleskins products are used in thousands of homes across the country, Baughmans research found.
Some of the products are sold to people who are home inspectors, but Baughmins products also were being sold to home inspectors.
He said the problem with the Navy rods is not the curtains themselves, but the way they are being manufactured.
“There’s a lack of inspection and testing, and then there’s a failure to use these products properly,” he added.
The study, published in the Journal of Safety Engineering, was the result of a two-year investigation of the curtain rod industry, which was led by the U and the U of Michigan.
The two-part study was done by a team led by Professor Daniel R. Voss, director for energy safety and environmental policy at the University of Michigan’s School of Engineering and Applied Science.
The researchers looked at all of the materials that manufacturers of curtain rods used in the Us and the United Kingdom.
The findings found that about 95% of curtain rod manufacturers in the United States, including Moleskins, did not test their products, according the report.
The majority of curtain manufacturer products were sold as “non-flammable,” meaning they were able “to be washed and cleaned and sealed with a chemical that is not harmful to human health or the environment,” according to the study.
This meant that, even though the products were made of a solid material, they would not “come apart if subjected to a fire, fire-related injury, accident, or other circumstance.”
“A curtain rod’s design is not designed to be a fire-resistant material, nor is the material designed to withstand the forces that can occur during fire-protection, fire, or maintenance of a curtain rod,” the study said.
Instead, the manufacturers of curtains used a material that was designed to allow water to enter and escape.
“This material is generally more prone to corrosion,” the researchers wrote.
“Moreover, many of these curtain rods have holes in them that allow moisture to enter the material, creating conditions